Easy cordless appliance control. Ultra One includes rubber base to prevent slippage and battery.

Force to activate - 10 oz / 300 g
SIZE (diameter) 4.5" x 1.5" 11.5 cm x 4 cm

PN: ECUA-0013  Price $239

Four large buttons provide tactile and auditory feedback, and are good for children and people with a large range of motion. The size of the buttons makes them easier to target, so it is ideal for people who use mouth sticks or head pointers for access. Can control up to four different appliances per room. (Receiver not included)

Force to activate - 5 oz / 150 g
SIZE: 8.25 x 5 x 1.5" 21 x 13 x 4 cm

PN: ECUA-0014                        Price $54

Four closely-grouped buttons are ideal for people with fine motor skills and good targeting ability. Small buttons provide tactile feedback. Can control up to four different appliances per room. (Receiver not included)

Force to activate - 10 oz / 300 g
SIZE: 4 x 2.5 x 1" 10 x 6 x 2.5 cm
KEY SIZE: 1.5 x 1.5" 3.5 x 3.5 cm / 5/8 in 1.5 cm between keys

PN: ECUA-0015                        Price $239

Allows a person the option of using four single switches to send four ultrasound signals or one single switch to scan through the signals and select. Ideal for people who require special access using switches. Can control up to four different appliances per room. (Switches not included.)

Force to activate based on switch (Switches not included)
SIZE : 5.5 x 3.25 x 1.25" 14 x 8.3 x 3.2 cm

PN: ECUA-0016 Price: $145

Joystick control on your wheelchair to control appliance in each room of your home, office and/or school.
SIZE : 3x 5.5 x 1.2" 8.5 x 14 x 3.5 cm

Electralink Total Wireless Package
PN: ECUA-0031 Price: $229

The most economical alternative for cause and effect training, both for single switches and wireless!

Single switch control of electrical appliances.

• 100 - 1500 W, 15A
• Latched mode
• Timed mode - seconds or minutes
• Direct mode

Built in Ultrasound Receiver offers remote access with Yellow Ultra One Transmitter.

3 Prong Appliance Module

PN: ECUA-0017            Price: $13

Grounded 1/3 HP, 15A, with AGC circuit for X-10 control of lamps, coffee maker, stereo, humidifiers, etc.

Additional Information:
Does not have intensity control
Does not respond to "All Lights ON"
Available only in white

In-Wall Light Module (Single pole)

PN: ECUA-0018            Price: $11

Upgrades your existing standard single pole wall switches. For automation of indoor/outdoor lights including front porch, patio, hallway, and stairway lights.
Rated at 500W (incandescent). Dimmable through X10 controllers.

3 way In-Wall Light Module (not pictured)

PN: ECUA-0019            Price: $19

Works with any X10 remote control to remotely control your lights from anywhere in your home, or dim them (even if they don’t dim normally). Rated at 500W (incandescent).

In-Wall Receptacle Module

PN: ECUA-0020            Price: $17

Offers X-10 control of lamps and appliances.  Can be used in place of the 3 Prong Appliance Modules for a more professional look.

15A Duplex receptacle, only top outlet is X-10 controlled.

PN: ECUA-0021            Price: $19

Emits a doorbell like chime when it receives the appropriate "ON" signal from an X-10 controller.  Commonly used with Environmental Control Units so that disabled people can call for assistance or with Floodlight Motion Detectors for advance notice of someone approaching the house.

X-10 Radio Frequency Transceiver

PN: ECUA-0022            Price: $19

The X-10 Transceiver receives radio frequency signals from Environmental Controls such as the Mini-Relax or the Relax II.  The X-10 Transceiver then sends commands to the X-10 modules throughout your house over the existing wiring.  A separate X-10 module is required for each appliance or light you want to control.  You can control up to 16 modules per Transceiver.